Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Piaggio Vespa 125 ET4

Model: Piaggio Vespa Et4
Part: Engine oil

Video tutorial

To change the engine oil on a Piaggio Vespa 125 ET4, start by warming up the engine for a few minutes to thin the oil. Turn off the engine and place the Vespa on a centre or side stand for stability. Locate the oil drain plug on the engine casing.

Position a collection tray under the drain plug. Use an appropriate spanner to unscrew the plug and allow the oil to drain completely into the tray.

Once the oil has fully drained, securely replace the drain plug. Find the oil filler cap, usually located on the side of the engine, and remove it. Use a funnel to slowly pour in the recommended amount of new oil as per the owner's manual.

Ensure you do not exceed the maximum level indicated on the oil dipstick. After pouring in the new oil, securely replace the filler cap. Check that all caps are tightly closed.

Start the engine for a few minutes and check for any oil leaks.


Updated on 7 October 2026 by ScegliAuto


Related tutorials

How to Change the Oil in a Piaggio Vespa ET4 125 Scooter
How to Change the Oil in a Piaggio Vespa ET4 125 Scooter
Vespa Et4 In this tutorial, you will see how to change the oil in a Piaggio Vespa ET4 125 scooter. For this operation, you will need a set of screwdrivers, pli…
How to Change the Engine Oil on a Piaggio Vespa ET4 Scooter
How to Change the Engine Oil on a Piaggio Vespa ET4 Scooter
Vespa Et4 In this tutorial, you will learn how to change the engine oil on a Piaggio Vespa ET4 scooter, a simple and quick operation to perform every 12 months…
How to Replace the Spark Plug on Piaggio Vespa ET4 125
How to Replace the Spark Plug on Piaggio Vespa ET4 125
Vespa Et4 Today's instructions will guide you through removing and replacing the spark plug on the Piaggio Vespa ET4 125 scooter in simple steps. First, place …

How to Replace the Remote Battery of the Ducati Multistrada?

Replacing the remote battery of the Ducati Multistrada, as shown in this tutorial, is an extremely simple and quick operation. You will need a replacement CR2032 battery and, if necessary, a small flat-head screwdriver. First, grasp the rear cover, then push it down firmly to detach it from the remote. Next, remove the circular white cap, take out the old battery, and insert the new one, ensuring the correct polarity. Finally, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos