Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter of a Renault Clio IV

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Air filter

See other generations:
Video tutorial

In this video, we will see how to replace the air filter of the Renault Clio IV: we open the hood and remove the screw that secures the air intake, then the electrical connector located on the right. We then remove the plastic box in order to work better and remove the four screws securing the cover.

We remove the dirty filter and clean the container well from all dust and dirt residues, before placing the new and clean filter, paying attention to the mounting direction, otherwise it will not be able to filter. We close the screws and reposition the box. We reconnect the electrical plug and then screw back the air intake.

Job done.


Posted on 1 March 2025 by ScegliAuto


Related tutorials

How to Change the Engine Air Filter on a Renault Clio 4
How to Change the Engine Air Filter on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To replace the engine air filter on your Renault Clio fourth generation by yourself, you only need a few minutes. All you have to do is read the foll…
How to Replace the Air Filter of the 2012 Renault Clio
How to Replace the Air Filter of the 2012 Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Replacing the engine air filter of your 2012 Renault Clio III is quite simple. Follow the procedure below to complete the task without any difficulty…
How to replace the engine air filter of the Renault Clio 5
How to replace the engine air filter of the Renault Clio 5
Renault Clio (2019-2026 / Clio V, Clio 5) If it is time to replace the engine air filter of your Renault Clio fifth series, all you need to do is read the following guide carefully and follow…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos