Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to access the internal fuse box and relays of the Renault Twingo

Model: Renault Twingo Twingo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuse box

See other generations:
Video tutorial

The information provided in this guide will allow us to access the internal fuse box and relays of the Renault Twingo. First, we open the front door of the vehicle, on the driver's side, and start removing the plastic cover found at the bottom left on the driver's side; inside we will find the fuse box and relays, as shown in the video.

Usually, we find the fuse diagram and diagram inside the cover, also available in the vehicle's user manual; we replace any faulty fuses, always making sure to respect the amperage.


Posted on 19 June 2025 by ScegliAuto


Related tutorials

Diagram and Positioning of the Internal Fuses of the Renault Twingo
Diagram and Positioning of the Internal Fuses of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) Today we will see the instructions that will allow us to access the internal fuse box of the Renault Twingo, along with the diagram. First, open the …
Internal Fuse Layout and Location for the Renault Twingo
Internal Fuse Layout and Location for the Renault Twingo
Renault Twingo (2014-2024 / Twingo III, Twingo 3) It is important to know the layout and diagram of the internal fuses for your Renault Twingo. First, get into the vehicle from the front passenger si…
Where is the internal fuse box of the Renault Twingo 2?
Where is the internal fuse box of the Renault Twingo 2?
Renault Twingo (2007-2014 / Twingo 2) In this guide, discover where the internal fuse box of your Renault Twingo Mk2 is located. It will only take a few seconds if you follow the instruct…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos