Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the internal fuse box of the Renault Twingo 2?

Model: Renault Twingo Twingo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuse box

See other generations:
Video tutorial

In this guide, discover where the internal fuse box of your Renault Twingo Mk2 is located. It will only take a few seconds if you follow the instructions provided.

Once the car is turned off, go to the driver's side and locate the small compartment under the buttons on the left side of the dashboard. Remove it with your hands (you can also use a flat screwdriver if needed), and right behind it, you will finally have access to all the fuses in the central fuse box of your Renault Twingo.

When finished, do not forget to refit the protective panel.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

Internal Fuse Layout and Location for the Renault Twingo
Internal Fuse Layout and Location for the Renault Twingo
Renault Twingo (2014-2024 / Twingo III, Twingo 3) It is important to know the layout and diagram of the internal fuses for your Renault Twingo. First, get into the vehicle from the front passenger si…
Location of the Fuse Box on Renault Twingo 1
Location of the Fuse Box on Renault Twingo 1
Renault Twingo (1993-2007 / Twingo 1) In this video, see the location of the internal fuse box on a first-generation Renault Twingo, following the instructions below. Locate the fuse box,…
Where to Find the Fuses on a Renault Twingo
Where to Find the Fuses on a Renault Twingo
Renault Twingo (2014-2024 / Twingo III, Twingo 3) The fuses on a Renault Twingo are divided into specific fuse boxes installed in the vehicle: in this model, there are two fuse boxes. The first is lo…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos