Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the door panel of the Renault Arkana

Model: Renault Arkana MK 1 - Years 2019-2026
Part: Car door

In this new guide of ours, we will explain how you can remove the door panel of your Renault Arkana. First of all, enter the car and make sure it is turned off, then locate the small plastic cover inside the handle and remove it. Once you have done this, unscrew the screw with a suitable screwdriver and pull the handle towards you. At this point, disconnect the electrical connector. Then unscrew all the other screws holding the door panel in place and complete the removal of the panel.

Posted on 24 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service and tire pressure on the Renault Arkana.
How to reset the service and tire pressure on the Renault Arkana.
Renault Arkana (2019-2026 / MK 1) In the Renault Arkana, to reset the maintenance warning after an oil change, park the Renault Arkana and turn on the instrument panel without startin…
How to Replace the External Trim on the Doors of the Renault Arkana
How to Replace the External Trim on the Doors of the Renault Arkana
Renault Arkana (2019-2026 / MK 1) To replace the external trim on the doors of the Renault Arkana, open the corresponding doors to access the bolts securing them from the inside. Once…
Where is the OBD2 Port in a Renault Arkana?
Where is the OBD2 Port in a Renault Arkana?
Renault Arkana (2019-2026 / MK 1) If you own a Renault Arkana and want to know how to access the OBD2 port of the car, then the following guide is all you need. First, enter the vehic…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos