Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the Renault Alaskan pickup?

Model: Renault Alaskan MK 1 - Years 2017-2024
Part: Cabin air filter

In this tutorial, we will see how to replace the cabin filter in the Renault Alaskan pickup, a very simple and quick operation. First, let's go to the passenger side, then open the glove compartment, empty it, and detach it from the dashboard by pressing both sides inward. Next, we locate the long rectangular cover, open it by unlocking the corresponding clip, and remove the old filter. At this point, all that's left to do is to clean the housing of any dirt residue, insert the new filter, and reassemble everything by following the reverse procedure.

Posted on 6 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Renault Alaskan?
How do you reset the Service light on the Renault Alaskan?
Renault Alaskan (2017-2024 / MK 1) To completely reset the Service light of the Renault Alaskan, you will need to insert the ignition key into the corresponding slot in order to turn o…
How do you set the clock of the Renault Alaskan?
How do you set the clock of the Renault Alaskan?
Renault Alaskan (2017-2024 / MK 1) To adjust the clock of the Renault Alaskan, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: once …
How do you reset the Service light on the Renault Alaskan?
How do you reset the Service light on the Renault Alaskan?
Renault Alaskan (2017-2024 / MK 1) You can completely remove the Service light that is shown on the instrument panel of the Renault Alaskan by inserting the ignition key into the appro…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos