Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Rear-View Mirror of a Renault Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Side mirror

This guide will show you how to remove and replace the external rear-view mirror of a Renault Clio. First, open the front door of the vehicle and start unscrewing the fixing screws located behind the external rear-view mirror, removing the triangular plastic cover first; then disconnect the electrical connector for the glass adjustment, as shown in the video. At this point, you can slide the mirror out from the outside, replacing it with the new one; secure it properly and finally adjust the glass!

Posted on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the exterior rearview mirror of the Renault Clio.
How to remove the exterior rearview mirror of the Renault Clio.
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Below, we will discover all the information related to the disassembly and replacement of the external rearview mirror of the Renault Clio. First, le…
How to disassemble the external rearview mirror of the Renault Clio
How to disassemble the external rearview mirror of the Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) .. will show us the process of disassembling and replacing the external rearview mirror of the Renault Clio. First, we open the front door of the car.. …
How to Replace the External Wing Mirror on the Renault Clio
How to Replace the External Wing Mirror on the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The following steps will show you how to remove and replace the external wing mirror on the Renault Clio. First, open the front door and start by rem…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos