Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on the Renault Clio?

Model: Renault Clio MK 4, Clio IV, Clio 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, we will see how to reset the service light on the Renault Clio, a very simple and quick operation to perform only after completing all scheduled maintenance tasks. First, go inside the cabin, then insert the key and turn on the ignition.

Next, scroll through the various display information using the directional arrows on the right stalk, navigate to the "SERVICE INTERVAL" option, and hold the up arrow to enter that section. At this point, simply perform the reset by holding down the same button.


Posted on 28 September 2026 by ScegliAuto


Related tutorials

Renault Clio (2012-2019 / MK 4, Clio IV, Clio 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…
Renault Clio (2005-2013 / Clio III, MK 3, Clio 3) In a few steps, we will see how to reset the service maintenance light for the oil change of the Renault Clio. First, we get into the car and start t…
Renault Clio (2005-2013 / Clio III, MK 3, Clio 3) Before you begin, sit in the driver's seat of your Renault Clio. Start by turning on the ignition by turning the key in the ignition barrel. Next, wa…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Cabin Fan in the Nissan Qashqai?

The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws.

Watch the video!


by ScegliAuto

More videos