Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light in the Renault Clio?

Model: Renault Clio Clio III, MK 3, Clio 3 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, you will see how to reset the service light in the Renault Clio, a very simple and quick operation, to be performed only after completing all scheduled maintenance work. First, go inside the cabin, then insert the key and turn on the ignition.

Next, scroll through the various information on the display using the directional arrows on the right-hand stalk, reach the service screen and hold down the down arrow for the necessary time until the interval resets correctly. To complete the procedure, simply restart the vehicle.


Posted on 28 September 2026 by ScegliAuto


Related tutorials

Renault Clio (2005-2013 / Clio III, MK 3, Clio 3) Before you begin, sit in the driver's seat of your Renault Clio. Start by turning on the ignition by turning the key in the ignition barrel. Next, wa…
Renault Clio (2012-2019 / MK 4, Clio IV, Clio 4) Before starting, sit in the driver's seat of your Renault Clio. Begin by inserting the key into the designated slot, then activate the instrument pan…
Renault Clio (2012-2019 / MK 4, Clio IV, Clio 4) Before you can begin, sit in the driver's seat of your Renault Clio. Start by highlighting the phrase "Maintenance Range" on the multifunction displa…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Cabin Fan in the Nissan Qashqai?

The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws.

Watch the video!


by ScegliAuto

More videos