Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Gear Knob on a Renault Clio III

Model: Renault Clio Clio III, MK 3, Clio 3 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Shift knob

See other generations:
Video tutorial

To replace the gear knob on a Renault Clio III, the procedure is simple and does not require special tools. First, unclip the clips of the lower plastic cover (the one at the base of the lever) and lift it. Remove the rubber ring that holds the gaiter around the lever.

At this point, detach the remaining plastic part by gently rocking it left and right until it slides off. Once the old knob is removed, install the new one by pushing it firmly onto the lever. You can find it on Amazon with the code B0GWGR3MQQ for £11.77, with free delivery.

Refit the gaiter clip. Snap the plastic cover back into place.


Posted on 6 October 2026 by ScegliAuto


Related tutorials

Renault Clio (2005-2013 / Clio III, MK 3, Clio 3) If the gear knob on your Renault Clio Mk3 is excessively worn and you want to remove it, follow the procedure outlined in this guide. First, get into…
Renault Clio (2005-2013 / Clio III, MK 3, Clio 3) To remove the gear knob of your Renault Clio, simply grip it firmly and pull upwards with some force. Ensure you apply even and consistent pressure w…
Renault Clio (2005-2013 / Clio III, MK 3, Clio 3) Today's information will show you how to remove and replace the gear shift knob on the Renault Clio. First, get inside the vehicle and begin by detac…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos