Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the knob of the Renault Clio gear lever

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Shift knob

Today's information will show us how to disassemble and replace the gear lever knob of the Renault Clio. First, we get into the car and start by removing the gear shift boot from the base, levering it on the sides; then we detach the clamp between the boot and the gear knob, as shown in the video. At this point, we pull the gear knob upwards with force to detach and remove it from the lever; we install the new knob, fixing it properly, installing a clamp between the knob and boot, and properly securing the boot.

Posted on 2 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Gear Knob of a Renault Clio
How to Remove the Gear Knob of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Before you begin, sit in the driver's seat of your Renault Clio. Start by prising off and lifting the lower section of the gear lever gaiter. Next, g…
How to Replace the Gear Shift Knob on a Renault Clio?
How to Replace the Gear Shift Knob on a Renault Clio?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) This guide provides instructions for removing and replacing the manual gear shift knob on the Renault Clio. First, get inside the cabin and start det…
How to replace the gear knob of the Renault Clio
How to replace the gear knob of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today's instructions will allow us to disassemble and replace the gear lever knob of the Renault Clio. First, we get into the car and start by discon…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos