Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gear Knob on the Renault Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Shift knob

Briefly, here are the instructions to remove and replace the gear knob on the Renault Clio in simple steps. First, get into the vehicle and start to lever the side of the gear gaiter to detach and remove it; then, unclip the strap found between the gaiter and the knob, as shown in the video. At this point, detach and remove the gear knob, replacing it with the new one; if necessary, also replace the gear gaiter, applying the reverse procedure for reassembly!

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Gear Knob of a Renault Clio
How to Remove the Gear Knob of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Before you begin, sit in the driver's seat of your Renault Clio. Start by prising off and lifting the lower section of the gear lever gaiter. Next, g…
Removing Gear Knob on Renault Clio - Dacia Sandero
Removing Gear Knob on Renault Clio - Dacia Sandero
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In today's video, learn how to remove and replace the gear knob on a fourth-generation Renault Clio, as well as on a Dacia Sandero or Duster. Changin…
How to disassemble the gear knob of the Renault Clio 3
How to disassemble the gear knob of the Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) If the gear knob of your Renault Clio Mk3 is excessively worn out and you want to remove it, then all you have to do is follow the procedure describe…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos