Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the front hood of a Clio

Model: Renault Clio MK 2, Clio 2 - Years 1998-2005
Part: Body

Open the front engine hood to do car maintenance? Let's see how it opens. We pull the lever located at the bottom left of the dashboard, then, slightly raise the bonnet and pull the release lever to the left. Once the engine hood is unlocked, lift it up and secure it with the locking rod. Now that we have opened the bonnet we can do our due maintenance. To close the hood we remove the safety rod and let the hood drop down from a minimum height. Let's check if the hood is closed properly.

Posted on 25 May 2020 by ScegliAuto

Video tutorial

Related tutorials

How to open the engine hood of the Renault Clio
How to open the engine hood of the Renault Clio
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) Today's video will show us how to open the hood of the Renault Clio, in simple and quick steps. First, we open the front door and start pulling the p…
How to open the engine hood in the Renault Clio?
How to open the engine hood in the Renault Clio?
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) In this tutorial, we can see how to open the engine hood in the Renault Clio 4, an extremely simple operation that is not different from the standard…
How to open the front hood of the Renault Clio
How to open the front hood of the Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Before we can start, we will have to go and sit in the driver's seat of our Renault Clio. At the bottom left, under the dashboard, is the hood releas…

Other guides you may be interested in

Removing the Timing Belt on a Suzuki Vitara

In this video, see the removal and replacement of the timing belt and water pump on a Suzuki Vitara. Open the bonnet and lift it, securing it in place. Use a socket wrench to remove the cooling radiator along with the associated hoses. Disconnect the power wiring using pliers, and remove the plastic undertray with a screwdriver. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket wrench to unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench. Finally, reinstall the radiator with the securing bolts.

Watch the video!


by ScegliAuto

More videos