Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : Front door window repair

Renault Scenic - Video tutorial

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Door panel
Operation: Front door window repair

Unscrew the screws on the side of the door and on the armrest. Remove the panel by levering with a screwdriver on the various plastic clips and then push it upwards. Pay attention to the cables connected to it, which must be removed to definitively remove the panel. Remove the gaskets and the panel that separates the windows. Unscrew the screw that holds the crystal which must be removed carefully. Now you can access the mechanics of the window regulator. First disconnect the engine electrical harness connector. With a ratchet wrench remove the nuts that secure the motor block and release the stop at the base of the rod. Unscrew the torx screws and remove the entire mechanical group of the window regulator movement. Proceed to repair by replacing the worn parts including the mechanical part of the movement of the rod or of the complete unit.


Posted on 8 July 2023 by ScegliAuto



How to remove the window motor of the Renault Scenic
Renault Scenic (1996-2003 / ) Remove the window motor of the Renault Scenic? Let's remove the door panel first. With a screwdriver we go to unscrew the tightening screws in the in
Remove the window az motor on Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Remove the window motor on Scenic? We disassemble the pieces as in the guide. We disconnect the battery terminals located in the dedicated compartmen
How to replace the window motor on Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Do we want to replace the car window motor? Let's see how the piece is removed from inside the Scenic's door. Before starting the disassembly work, l

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos