Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlight on a Renault Clio 2

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Headlight

See other generations:
Video tutorial

In today's video tutorial, follow the steps to remove the front headlights of a Renault Clio second series in simple steps. First, open and lift the bonnet.

Use a socket spanner to unscrew the fixing screws located above the headlight. Next, disconnect the electrical connector of the bulbs found at the back of the unit and extract it, as illustrated in the video.

Finally, replace it with the new one by reassembling it using the reverse procedure of disassembly; follow the video to the end!


Updated on 15 April 2026 by ScegliAuto


Related tutorials

Removing the Front Headlight of the Clio
Removing the Front Headlight of the Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Do you want to remove the front headlight of a Renault Clio? Let's see how to disassemble the front headlight. Before removing the front headlight, y…
How to Remove the Front Headlight from a Renault Clio
How to Remove the Front Headlight from a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) In this short and simple guide, we will see the steps that will allow you to remove and replace the front headlight of the Renault Clio. To remove th…
How to Replace the Front Headlight Bulb on a Renault Clio
How to Replace the Front Headlight Bulb on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) The following instructions will allow you to remove and replace the front headlight bulb on a Renault Clio. First, open the engine bonnet of the vehi…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos