Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : Remove the headlight of the Clio

Renault Clio - Video tutorial

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Headlight
Operation: Remove the headlight of the Clio

We want to remove the headlight of the Renault Clio? Let's see the disassembly of the front light. Before disassembling the headlight, we need to remove the front bumper. We unscrew the locking pins located in the upper part of the bumper, the stone guard pins and remove the pins located in the lower part of the bumper. We remove the bumper from the car body by hand. After complete removal of the bumper, we detach the headlights from the car body, the lamp holders from the headlight. We fit the new headlight with new bulbs if damaged and (always suitable type and size). At the end of fixing the headlight we just have to mount the bumper.


Posted on 4 February 2024 by ScegliAuto



Removal of headlight lights on Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Replacing the burned out bulbs of the Clio headlight, let's see the disassembly on the front headlight. We open the front hood by pulling the lever l
Clio internal headlight bulb replacement
Renault Clio (1998-2005 / Clio 2, MK 2) Are the headlight bulbs of our car damaged? Let's see how to remove the Clio headlight bulbs. To disassemble the headlight bulbs, remove the cover ca
How to replace the headlight bulb on Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The replacement of the headlight bulb of the Renault Clio 4 is carried out by opening the hood so that you can access the rear part of the headlight

    Frequently Asked Questions

    • Clio 2012-2019 - What are the sidelights on Renault Clio 4? Read Answer
    • Clio 2012-2019 - Replacing the sidelights on Renault Clio 4, where are they located? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos