Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Clio
  6. : How to remove the headlight on a Clio

Renault Clio - Video tutorial

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Headlight
Operation: How to remove the headlight on a Clio

How to remove the headlight on a Renault Clio? Let's see or disassembly. We disassemble the front bumper to disassemble the headlight. With a cordless screwdriver or screwdriver we unscrew the locking pins located in the upper part of the bumper. Once the screws at the top have been unscrewed, unscrew the stone guard pins and remove the bumper. We unscrew the fastening screws of the headlight, detach the headlight from the car body. We fit the new headlight with new bulbs if damaged and (always suitable type and size). We mount the front bumper and test the operation of the lights.


Posted on 16 December 2023 by ScegliAuto



Removal of headlight lights on Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Replacing the burned out bulbs of the Clio headlight, let's see the disassembly on the front headlight. We open the front hood by pulling the lever l
Clio internal headlight bulb replacement
Renault Clio (1998-2005 / Clio 2, MK 2) Are the headlight bulbs of our car damaged? Let's see how to remove the Clio headlight bulbs. To disassemble the headlight bulbs, remove the cover ca
How to replace the headlight bulb on Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The replacement of the headlight bulb of the Renault Clio 4 is carried out by opening the hood so that you can access the rear part of the headlight

    Frequently Asked Questions

    • Clio 2012-2019 - What are the sidelights on Renault Clio 4? Read Answer
    • Clio 2012-2019 - Replacing the sidelights on Renault Clio 4, where are they located? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos