Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight of the Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Headlight

Below are the steps that will allow you to remove and replace the front headlight and its bulbs on the Renault Clio, following the instructions provided. First, open the bonnet of your car and start by removing the plastic shield above the bumper. Next, remove both front wheel arch liners by unscrewing the fastening screws, and take off the plastic cover located under the bumper, as shown in the video. At this point, gently remove the bumper by unscrewing the screws of the headlight assembly and disconnecting the connectors to remove it and replace it with the new one!

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Headlight of the Clio
Removing the Front Headlight of the Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Do you want to remove the front headlight of a Renault Clio? Let's see how to disassemble the front headlight. Before removing the front headlight, y…
How to disassemble the front headlight of the Renault Clio
How to disassemble the front headlight of the Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Today we will see the instructions on how to disassemble and replace the front headlight of the Renault Clio. First of all, we open the hood of the c…
How to Remove Front Headlight Bulb on Renault Clio 3
How to Remove Front Headlight Bulb on Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video, we will see how to remove the front headlight bulbs on the Renault Clio third series. First, open the bonnet from the inside and secur…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos