Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the External Wing Mirror on a Renault Clio 3

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Side mirror

See other generations:
Video tutorial

In this video tutorial, you will see the main instructions on how to remove the external wing mirror of a Renault Clio third series. First, open the door and remove the triangular plastic cover behind the wing mirror by prying it off; then unscrew the fixing screws located underneath using a socket spanner with an extension, and disconnect the electrical connector to pull the mirror out from the outside.

Finally, replace it with the new one, applying the reverse procedure for reassembly!


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to remove the exterior rearview mirror of the Renault Clio.
How to remove the exterior rearview mirror of the Renault Clio.
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Below, we will discover all the information related to the disassembly and replacement of the external rearview mirror of the Renault Clio. First, le…
How to disassemble the external rearview mirror of the Renault Clio
How to disassemble the external rearview mirror of the Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Today's guide will show us the process of disassembling and replacing the external rearview mirror of the Renault Clio. First, we open the front door…
How to Replace the External Wing Mirror on the Renault Clio
How to Replace the External Wing Mirror on the Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) The following steps will show you how to remove and replace the external wing mirror on the Renault Clio. First, open the front door and start by rem…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos