Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped Beam on a Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight bulb

See other generations:
Video tutorial

Open the bonnet and insert the support rod. Unscrew and remove the two upper bolts securing the headlamp to the body and pull it out of its housing. At the rear of the unit, you will notice two metal clips holding a cover: open the clips and remove the cover, then disconnect the connector and extract the burnt-out bulb.

Insert the new bulb, ensuring it is the correct way round. Reconnect the connector and refit the rear cover, securing it with the two metal clips.

Reassemble the headlamp by screwing in the two bolts.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How to Replace the Dipped Beam Bulbs in a Renault Megane?
How to Replace the Dipped Beam Bulbs in a Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) Replacing the dipped beam bulbs in a Renault Megane 3 is very simple. For this operation, you will need a 13mm socket and, of course, replacement bul…
Replacing the Dipped Beam Bulb on a Renault Megane
Replacing the Dipped Beam Bulb on a Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) This brief video guide shows the procedure to replace the dipped beam bulb (H7) on a fourth-generation Renault Megane, produced from 2015 to 2022. St…
How to replace the headlight bulb on the Renault Megane
How to replace the headlight bulb on the Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) These steps will illustrate the procedure for removing and replacing the dipped beam bulb of the front headlight on the Renault Megane. First, open t…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos