Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the 2017 Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Service warning light

In this guide for the 2017 Renault Clio, discover how to quickly and correctly perform a manual reset of the service light. Once inside the cabin, insert the key and turn on the instrument panel. Press the top button on the right lever multiple times until you see the icon of a small spanner on the mini display. Then, press both buttons on the lever simultaneously and release them as soon as the reset is successfully completed. Finally, turn off the ignition.

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Renault Clio V
How to Reset the Service Light on a Renault Clio V
Renault Clio (2019-2026 / Clio V, Clio 5) Let’s see how to reset the service light on a Renault Clio V: turn on the ignition without starting the engine and wait for the instrument test. Navi…
Reset Service Light Renault Clio 4
Reset Service Light Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today, you will learn how to reset the service light for the routine maintenance oil change on a Renault Clio fourth series. First, get inside the ve…
Resetting the Service Light on a Renault Clio 4
Resetting the Service Light on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Let's discover the procedure for resetting the service light for the regular maintenance oil change on a Renault Clio fourth series. First, get in th…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos