Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the front door panel of the Renault Megane 3

Model: Renault Megane Megane 3, Megane III - Years 2008-2015
Part: Door trim panel

Let's find out in this video how to remove the front door panel of the Renault Megane third series, in simple and quick steps. First of all we open the front door and start by removing the small plastic cap from the handle; then unscrew the screw that we find below, using a torx screwdriver, as shown in the video. At this point we unscrew the additional screws that we find on the sides of the panel; therefore we also remove the triangular plastic cover of the rear-view mirror. We just have to pry the sides of the panel to remove it!

Posted on 27 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front door panel of the Renault Megane.
How to disassemble the front door panel of the Renault Megane.
Renault Megane (2015-2023 / Megane IV, Megane 4) Below we will see the main instructions that will allow us to disassemble and replace the front door panel of the Renault Megane. First, we open the …
How to disassemble the front door panel of the Renault Megane
How to disassemble the front door panel of the Renault Megane
Renault Megane (2002-2010 / Megane 2) In a few simple steps, we will see how to disassemble the front door panel of the Renault Megane. First, open the front door of the car and start by …
Disassembly of the front door panel of the Renault Megane
Disassembly of the front door panel of the Renault Megane
Renault Megane (2002-2010 / Megane 2) In this short guide, we will see the instructions that will allow us to disassemble and remove the front door panel of the Renault Megane. First of a…

How to Replace the Damaged Number Plate Bulb on Fiat 600

In this video, learn how to replace the damaged number plate bulb on a Fiat 600. Use a screwdriver or plastic lever to remove the number plate light unit located in the rear bumper of the car. Once the light unit is removed, extract the lamp holder with your hands, then disconnect the bulb from it. Fit the new bulb/LED (same size and voltage) into the lamp holder, then reassemble the light unit into the bodywork of the tailgate, pressing it until the clips lock automatically. Finally, test the correct operation of the previously installed bulb.

Watch the video!


by ScegliAuto

More videos