Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the external rear handle on a Renault Megane?

Model: Renault Megane Megane IV, Megane 4 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Handle

See other generations:
Video tutorial

In this tutorial, you will see how to replace the external rear handle on a Renault Megane, a very simple and quick operation. First, open the door you will be working on, then locate the small rubber cap on the inner edge and pry it off with a flathead screwdriver.

Next, loosen the bolt just freed using a Torx key, taking care not to drop it inside the door. Remove the lock, grasp the handle, and separate it from the base.

To fit the replacement, simply follow the reverse procedure.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

How to Replace the External Door Handle on a Renault Megane
How to Replace the External Door Handle on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Today's guide provides instructions on how to remove and replace the external door handle on the front door of a Renault Megane. First, open the fron…
How to Remove the External Handle of the Renault Megane?
How to Remove the External Handle of the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) To remove the external handle of the Renault Megane, open the door and detach the seal covering the entire perimeter of the door at the handle height…
Removing the External Door Handle of the Renault Megane
Removing the External Door Handle of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Follow the steps below to remove and replace the external door handle of the front door of the Renault Megane. First, open the front door and start b…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos