Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the External Door Handle of the Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Handle

See other generations:
Video tutorial

Follow the steps below to remove and replace the external door handle of the front door of the Renault Megane. First, open the front door and start by removing the small plastic cap found over the hole; then insert a small lever to disengage the lock cylinder, allowing you to remove it, as shown in the video.

At this point, disengage and remove the entire handle, replacing it with the new one; then refit the lock cylinder, securing it correctly to the handle!


Updated on 26 July 2026 by ScegliAuto


Related tutorials

Removing the External Handle on Renault Megane
Removing the External Handle on Renault Megane
Renault Megane (2002-2010 / Megane 2) Is the door handle on your Renault Megane not working anymore? Before starting the disassembly, disconnect the battery terminals located in the engin…
How to Remove the External Handle of the Renault Megane?
How to Remove the External Handle of the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) To remove the external handle of the Renault Megane, open the door and detach the seal covering the entire perimeter of the door at the handle height…
How to remove the external handle of the Renault Megane?
How to remove the external handle of the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) To remove the external handle of the Renault Megane, open the door to access the screw inside the side hole of the door, which secures the lock. By r…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos