Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the External Handle on Renault Megane

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Handle

See other generations:
Video tutorial

Is the door handle on your Renault Megane not working anymore? Before starting the disassembly, disconnect the battery terminals located in the engine bay. Using a screwdriver, remove the internal handle located on the panel, and unscrew the screw inside the opening lever space.

Remove the handle from the door panel, then use a lever to detach the trim panel.

Remove the door panel. Use the lever to detach the adhesive panel of the door, disconnect the opening lever cable, then unscrew the securing bolts of the external handle and remove the cylinder.

Fit the new handle and the cover panel.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

How to Replace the External Door Handle on a Renault Megane
How to Replace the External Door Handle on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Today's guide provides instructions on how to remove and replace the external door handle on the front door of a Renault Megane. First, open the fron…
How to Remove the External Handle of the Renault Megane?
How to Remove the External Handle of the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) To remove the external handle of the Renault Megane, open the door and detach the seal covering the entire perimeter of the door at the handle height…
Removing the External Door Handle of the Renault Megane
Removing the External Door Handle of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Follow the steps below to remove and replace the external door handle of the front door of the Renault Megane. First, open the front door and start b…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos