Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : Head fixing pins replacement

Renault Megane - Video tutorial

Model: Renault Megane Megane 1 - Years 1995-2003
Part: Engine
Operation: Head fixing pins replacement

If a repair has been made to the engine that required disassembly of the cylinder head, then it is absolutely essential to use a new set of pins for the assembly of the cylinder; then check the pitch of the pins with the thread counter and select the appropriate male to re-pass the threads of the head fixing holes in the crankcase, taking care not to let chip residues end up in the cylinders; then fit the new gasket and the overhauled cylinder head, apply copper grease to the bottom of the thread and immediately under the head of the new pins, fasten them in their respective holes and tighten them according to the crossed type scheme using both the graduated and dynamometric wrench.


Posted on 31 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Megane 2015-2023 - Why does the engine of the Renault Megane 4 often overheat? Read Answer
    • Megane 2015-2023 - What problems does the Renault engine of the Megane 1.5 dCi 110 horsepower have? Read Answer
    • Megane 2008-2015 - Why does the 2011 Renault Megane 1.5 dCi make a strange noise in the engine? Read Answer
    • Megane 2008-2015 - What problems on the Renault Megane? Read Answer
    • Megane 2008-2015 - What are the problems with the 1.5 DCi engine of the Renault Megane? Read Answer
    • Megane 2002-2010 - What problems could the Renault Megane Grand Tour 1.5 dci present? Read Answer
    • Megane 2008-2015 - Power supply anomaly on Renault cars: what does it mean? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos