Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cylinder Head from a Renault Megane 1.5 DCi

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Cylinder head

Today's guide will show you the procedure for removing and replacing the engine cylinder head and its gasket on a Renault Megane 1.5 DCi. First, open the bonnet of the vehicle and start by removing the front bumper, unscrewing all the securing screws; then drain the coolant into a container by disconnecting the hose, and remove the radiator as shown in the video. Now remove the central hose and unscrew the screws of the cylinder head cover and then the cylinder head itself, following the video tutorial to the end!

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Starter Motor from a Renault Megane 1.9 dCi
Removing the Starter Motor from a Renault Megane 1.9 dCi
Renault Megane (2002-2010 / Megane 2) Here are the main steps to remove and replace the starter motor on a Renault Megane 1.9 dCi. First, open the bonnet of your car and disconnect the ba…
How to Replace the Starter Motor on a Renault Megane 1.9 dCi
How to Replace the Starter Motor on a Renault Megane 1.9 dCi
Renault Megane (1995-2003 / Megane 1) This brief and simple guide will show you how to remove and replace the starter motor on a Renault Megane 1.9 dCi. First, open the bonnet and disconn…
Replacing the Glow Plugs on the Renault Megane 1.4 DCI
Replacing the Glow Plugs on the Renault Megane 1.4 DCI
Renault Megane (2008-2015 / Megane III, Megane 3) In this brief and simple guide, see how to remove and replace the glow plugs in the engine of the Renault Megane 1.5 DCI, third series. First, open t…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos