Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Cylinder Head from a Renault Scenic 1.6

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Cylinder head

See other generations:
Video tutorial

Below are the main instructions on how to remove and replace the cylinder head of a Renault Scenic 1.6. First, open the bonnet of the vehicle and start by removing the upper plastic cover located under the wipers; remove the engine mount on the timing side and the air filter box, then remove the entire air intake duct as shown in the video.

At this point, remove the valve cover, disconnect the timing belt, and proceed with the removal of the cylinder head; carry out repairs or replacement as necessary!


Posted on 10 March 2026 by ScegliAuto


Related tutorials

Where to find and how to remove the EGR valve on a Renault Scenic 1.9 DCi
Where to find and how to remove the EGR valve on a Renault Scenic 1.9 DCi
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) This guide shows how to remove the EGR (Exhaust Gas Recirculation) valve on a Renault Scenic 1.9 DCi. After securing the vehicle and opening the bonn…
How to Dismantle the Dashboard of the Renault Scenic
How to Dismantle the Dashboard of the Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Today's guide will show you the main instructions on how to dismantle and replace the dashboard of the Renault Scenic. First, get inside the vehicle …
Where is the OBD Port on the Renault Scenic 3?
Where is the OBD Port on the Renault Scenic 3?
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) If you want to locate the OBD port on your Renault Scenic Mk3 in just a few seconds, simply follow the instructions in this mini guide. First, enter …

Other guides you may be interested in

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos