Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Air Filter on the Renault Scenic IV

Model: Renault Scenic MK IV, Scenic 4, MK 4, Scenic IV - Years 2016-2022
Part: Air filter

In this video, learn how to change the engine compartment air filter on the Renault Scenic IV. This filter is not in the classic box; it is located behind the battery, in a vertical position, protected by the grille/water deflector on the left side, which must be removed to gain access. Remove the 10 mm bolts (four in total: two at the front and two at the back). Once the grille is removed, you will see the engine air filter box in a vertical position, with a cover secured by Torx screws. Unscrew them, lift the cover, and remove the old filter. Clean the inside of the box, then insert the new filter in the same orientation as the previous one, close the box, reattach the grille, and the job is done.

Posted on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) If you don't know how to replace the engine air filter of your Renault Scenic Mk4, don't worry because with the procedure described below, you will b…
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) In this video, we see how to change the cabin filter on the Renault Scenic IV: the filter drawer is located in the passenger footwell (or on the righ…
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) To preserve the life and performance of your Renault Scenic's engine, it is important to regularly replace the air filter. In the following guide, yo…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos