Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery on a Renault Scenic 1.9 dCi

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Battery

See other generations:
Video tutorial

These brief and simple instructions will guide you on how to remove and replace the battery of the Renault Scenic 1.9 dCi. First, open the engine bonnet and start by disconnecting the air intake hose; then unscrew the battery bracket screw located at the bottom using a socket wrench with an extension, as shown in the video.

At this point, disconnect both battery terminals (positive and negative) to remove it; replace it with a new one of the correct type and same amperage, reconnecting it and starting the engine!


Posted on 16 April 2026 by ScegliAuto


Related tutorials

How to Remove the Starter Motor from a Renault Scenic 1.5 dCi MK2
How to Remove the Starter Motor from a Renault Scenic 1.5 dCi MK2
Renault Scenic (2003-2009 / Scenic 2, MK 2) In this guide, remove the starter motor from a Renault Scenic 1.5 dCi MK2. First, disconnect the battery from its housing to create space for accessi…
Guide to replacing the glow plugs of the Renault Scenic 1.9 dCi
Guide to replacing the glow plugs of the Renault Scenic 1.9 dCi
Renault Scenic (2003-2009 / Scenic 2, MK 2) Today's guide will show us the steps on how to disassemble and replace the glow plugs of the Renault Scenic 1.9 dCi. First, we open the hood of the c…
Replacing the Engine Air Filter on Renault Scenic 2 dCi Diesel
Replacing the Engine Air Filter on Renault Scenic 2 dCi Diesel
Renault Scenic (2003-2009 / Scenic 2, MK 2) In today's video, you will learn how to remove and replace the air filter on a Renault Scenic dCi second series. First, open and lift the bonnet and …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos