Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Air Filter on Renault Scenic 2 dCi Diesel

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Air filter

See other generations:
Video tutorial

In today's video, you will learn how to remove and replace the air filter on a Renault Scenic dCi second series. First, open and lift the bonnet and remove the rubber seal at the top; then, remove the three screws from the upper grille and the additional screws underneath using a 10 mm spanner.

At this point, access the air filter cover and unscrew the two screws to remove it: take out the old filter and replace it with the correct new one. Finally, reassemble everything, following the video to the end!


Updated on 9 April 2026 by ScegliAuto


Related tutorials

Replacing the Battery on a Renault Scenic 1.9 dCi
Replacing the Battery on a Renault Scenic 1.9 dCi
Renault Scenic (2003-2009 / Scenic 2, MK 2) These brief and simple instructions will guide you on how to remove and replace the battery of the Renault Scenic 1.9 dCi. First, open the engine bon…
Replacement of the Alternator in the Renault Scenic 1.5 dCi
Replacement of the Alternator in the Renault Scenic 1.5 dCi
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Today's main instructions will allow us to dismantle and replace the alternator in the Renault Scenic 1.5 dCi. First, open the vehicle's bonnet and b…
Replacement of the timing belt of the Renault Scenic 1.5 dCi
Replacement of the timing belt of the Renault Scenic 1.5 dCi
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) The following instructions will show us how to disassemble and replace the timing belt of the Renault Scenic 1.5 dCi. First, we open the hood of the …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos