Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the timing belt of the Renault Scenic 1.5 dCi

Model: Renault Scenic Scenic 3, MK 3, MK III, Scenic III - Years 2009-2015
Part: Timing belt

The following instructions will show us how to disassemble and replace the timing belt of the Renault Scenic 1.5 dCi. First, we open the hood of the car and start disassembling and removing the engine support and the distribution cover, unscrewing all the fixing screws; then we lift the car and remove the front right wheel and the wheel arch, removing the crankshaft pulley (after disconnecting the V-belt). At this point, we take the necessary references for the replacement of the timing belt, installing the new one.

Posted on 9 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on the Renault Grand Scenic 1.6
Guide to Replacing the Timing Belt on the Renault Grand Scenic 1.6
Renault Scenic (2003-2009 / MK 2, Scenic 2) Today's guide will show you the main steps needed to remove and replace the timing belt on the Renault Grand Scenic 1.6. First, open the bonnet and s…
Guide to Removing the Alternator from the Renault Scenic 1.9 DCi
Guide to Removing the Alternator from the Renault Scenic 1.9 DCi
Renault Scenic (2003-2009 / MK 2, Scenic 2) The following steps will allow you to remove and replace the alternator on the Renault Scenic 1.9 DCi. First, raise the vehicle and remove the front …
Replacement of the Alternator in the Renault Scenic 1.5 dCi
Replacement of the Alternator in the Renault Scenic 1.5 dCi
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Today's main instructions will allow us to dismantle and replace the alternator in the Renault Scenic 1.5 dCi. First, open the vehicle's bonnet and b…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos