Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the V-belt of the Renault Scenic 1.6

Model: Renault Scenic Scenic 1, RX4, MK 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: V-belt

See other generations:
Video tutorial

Today we will see the main instructions that will allow us to disassemble and replace the serpentine or trapezoidal belt of the Renault Scenic 1.6. First, lift the vehicle and start by disassembling and removing the right front wheel; then remove the fender to access the trapezoidal belt, then loosen the tensioner with a wrench to remove it, as shown in the video.

Remove the belt completely from the engine compartment, then insert the new one among the various pulleys (the diagram is shown in the video); make sure it is correctly inserted, finally reassemble the right front wheel.


Posted on 17 November 2025 by ScegliAuto


Related tutorials

How to Replace the Serpentine Belt on a Renault Scenic
How to Replace the Serpentine Belt on a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) To replace the serpentine belt on a Renault Scenic, lift the car using a ramp and loosen all the bolts securing the front right wheel to access the c…
Replacement of the timing belt of the Renault Scenic 1.5 dCi
Replacement of the timing belt of the Renault Scenic 1.5 dCi
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) The following instructions will show us how to disassemble and replace the timing belt of the Renault Scenic 1.5 dCi. First, we open the hood of the …
Guide to Removing the Alternator from the Renault Scenic 1.9 DCi
Guide to Removing the Alternator from the Renault Scenic 1.9 DCi
Renault Scenic (2003-2009 / Scenic 2, MK 2) The following steps will allow you to remove and replace the alternator on the Renault Scenic 1.9 DCi. First, raise the vehicle and remove the front …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos