Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on a Renault Scenic

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: V-belt

To replace the serpentine belt on a Renault Scenic, lift the car using a ramp and loosen all the bolts securing the front right wheel to access the components at the rear. Here, unscrew the screws fixing the wheel arch liner and remove it: this will expose the serpentine belt. The belt can be removed by loosening the tensioner pulley; once it is removed, a new one can be installed. After installing the new part, reassemble all the other components.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the V-belt of the Renault Scenic 1.6
How to replace the V-belt of the Renault Scenic 1.6
Renault Scenic (1993-2003 / Scenic 1, MK 1, RX4) Today we will see the main instructions that will allow us to disassemble and replace the serpentine or trapezoidal belt of the Renault Scenic 1.6. F…
Replacement of the timing belt of the Renault Scenic 1.5 dCi
Replacement of the timing belt of the Renault Scenic 1.5 dCi
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) The following instructions will show us how to disassemble and replace the timing belt of the Renault Scenic 1.5 dCi. First, we open the hood of the …
Guide to Removing the Alternator from the Renault Scenic 1.9 DCi
Guide to Removing the Alternator from the Renault Scenic 1.9 DCi
Renault Scenic (2003-2009 / MK 2, Scenic 2) The following steps will allow you to remove and replace the alternator on the Renault Scenic 1.9 DCi. First, raise the vehicle and remove the front …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos