Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Air Filter in a Renault Scenic

Model: Renault Scenic - Years 2009-2015
Part: Air filter

To change the engine air filter in a Renault Scenic 3, open the bonnet and position the wipers for maintenance. Remove the rubber seal and the plastic cover at the base of the windscreen on the driver's side. Move the brake fluid reservoir if necessary to access the filter box. Then unscrew the fixing screws of the filter cover and lift it. Extract the old filter element and clean the housing thoroughly, ensuring that dirt and debris do not enter the intake duct. Insert the new filter into the housing, ensuring it fits correctly against the edges. Reattach the cover and tighten the screws, then reposition the cover under the windscreen, the seal, and the brake fluid reservoir. Finally, return the wipers to their normal position. The procedure may vary slightly depending on the engine.

Posted on 25 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) To preserve the life and performance of your Renault Scenic's engine, it is important to regularly replace the air filter. In the following guide, yo…
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) In this video, learn how to change the engine compartment air filter on the Renault Scenic IV. This filter is not in the classic box; it is located b…
Renault Scenic (2003-2009 / MK 2, Scenic 2) How to replace the air filter on a Renault Scenic? Let's see how to remove the air filter from inside the engine compartment. Open the engine compart…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos