Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Engine Cylinder Head of a Renault Laguna 1.6

Model: Renault Laguna MK 2, Laguna 2, X74 - Years 2001-2007
Part: Cylinder head

In this guide, you will find the main instructions on how to dismantle and replace the engine cylinder head of a Renault Laguna 1.6. First, open the vehicle's bonnet and start by removing the left engine mount. Next, remove the air intake duct by unscrewing all the securing screws and disconnecting the various wiring. Then, unscrew the screws of the cylinder head cover to remove it, as shown in the video. You can then remove the cylinder head by unscrewing the screws on the block located at the top, following the video tutorial until the end!

Posted on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Cylinder Head Gasket
Replacement of Cylinder Head Gasket
Renault Laguna (2001-2007 / MK 2, Laguna 2, X74) The cylinder head gasket is an important component that sits between two surfaces, preventing the passage of fluids or gases. The head gasket is plac…
How to Remove the Dashboard of a Renault Laguna
How to Remove the Dashboard of a Renault Laguna
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) Below are the instructions that will allow you to remove and replace the entire dashboard of the Renault Laguna. First, get inside the cabin and star…
How to disassemble the car radio of the Renault Laguna
How to disassemble the car radio of the Renault Laguna
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) Below we will see the instructions that will allow us to disassemble and replace the original car radio of the Renault Laguna, in simple steps. First…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos