Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the engine mount of the Renault Laguna III

Model: Renault Laguna MK III, X91, Laguna III, MK 3, Laguna 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Engine mount

See other generations:
Video tutorial

In this video, we can see how to replace the engine mount (in this case, the right one) of the Renault Laguna III. First, we need to get the replacement part, which we can find on auto-doc. It has the code 4027816337232 and costs 53.33 euros + 9.90 euros for shipping.

It is a simple procedure, as there is no need to support the engine, just be on a flat surface.

We remove the cover from the engine block, then using an 18 mm socket wrench, we unscrew the bolt of the upper tie rod, and then the bolt of the connecting bar on the side. Now we can remove the old mount, which shows us the cracked and fragile rubber.

We replace it with the new piece, making sure it is in the correct position, then tighten the fixing bolts with a torque wrench to 115 Nm. Before putting the cover back on the engine block, we start the engine to make sure everything is in place.


Posted on 22 December 2024 by ScegliAuto


Related tutorials

Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) In this new guide dedicated to all of you who own a Renault Laguna Mk3, we will discover the steps you need to take in order to replace the rear head…
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) To replace the cabin fan resistor on a Renault Laguna, access the interior of the dashboard located directly beneath the glove compartment on the pas…
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) If you want to replace the engine air filter of your Renault Laguna Mk3 correctly and safely, all you have to do is carefully read the steps describe…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos