Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan Resistor on a Renault Laguna?

Model: Renault Laguna MK III, X91, Laguna III, MK 3, Laguna 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Blower motor

See other generations:
Video tutorial

To replace the cabin fan resistor on a Renault Laguna, access the interior of the dashboard located directly beneath the glove compartment on the passenger side: this can be completely removed to make the job easier. The resistor can now be located just below the fan, and you can disconnect it properly to connect the new one: once the new resistor is inserted, refit the glove compartment to check that everything is functioning.


Updated on 12 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Renault Laguna?
How to Replace the Front Headlamp Bulb on a Renault Laguna?
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) To replace the front headlamp bulb on a Renault Laguna, open the bonnet to access the components in the engine bay. Locate the internal protection pa…
How to Replace the Front Headlight Bulb on Renault Laguna?
How to Replace the Front Headlight Bulb on Renault Laguna?
Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) You can replace the front headlight bulb on the Renault Laguna by opening the bonnet to access the components inside the engine bay: here you will fi…
How to Replace the Front Headlamp Bulb on a Renault Laguna?
How to Replace the Front Headlamp Bulb on a Renault Laguna?
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) To replace the front headlamp bulb on a Renault Laguna, open the bonnet to access the components inside the engine bay. Here, locate the internal pro…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos