Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Starter Motor on a Renault Laguna

Model: Renault Laguna MK 2, Laguna 2, X74 - Years 2001-2007
Part: Starter motor

Follow this guide for instructions on how to remove and replace the starter motor on a Renault Laguna. First, open the bonnet and disconnect the battery terminals; then disconnect the intake hose to access the starter motor, as shown in the video. Next, undo the securing screws to remove the old starter motor and replace it with the new one, also disconnecting the electrical wiring; then install the new original starter motor and reassemble everything by applying the reverse procedure!

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Dashboard of a Renault Laguna
How to Remove the Dashboard of a Renault Laguna
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) Below are the instructions that will allow you to remove and replace the entire dashboard of the Renault Laguna. First, get inside the cabin and star…
How to Dismantle the Engine Cylinder Head of a Renault Laguna 1.6
How to Dismantle the Engine Cylinder Head of a Renault Laguna 1.6
Renault Laguna (2001-2007 / MK 2, Laguna 2, X74) In this guide, you will find the main instructions on how to dismantle and replace the engine cylinder head of a Renault Laguna 1.6. First, open the …
How to disassemble the car radio of the Renault Laguna
How to disassemble the car radio of the Renault Laguna
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) Below we will see the instructions that will allow us to disassemble and replace the original car radio of the Renault Laguna, in simple steps. First…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos