Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Laguna
    4. : Starter motor

Renault Laguna - Starter motor

Starter Motor Renault Laguna (2001-2007 / mk 2, laguna 2, x 74)

Renault Laguna (2001-2007 / MK 2, Laguna2, X74)
How to Remove and Replace the Starter Motor on a Renault Laguna
Follow this guide for instructions on how to remove and replace the starter motor on a Renault Laguna. First, open the bonnet and disconnect the battery …Read all…
Posted on 17 September 2026 by ScegliAuto
Shocks (7) Air conditioning (1) Car stereo (7) Control arm (1) Body (3) Key (10) Timing belt (3) A/C controls (1) Onboard computer (4) Checks and maintenance (8) Dashboard (6) Brake rotors (3) Headlight (12) Tail light (3) Fog lights (2) Diesel particulate filter (1) Air filter (9) Cabin air filter (8) Diesel fuel filter (2) Parking brake (4) Xenon headlight kit (2) Light bulb (1) Side marker bulb (2) Headlight bulb (16) Tail light bulb (2) Interior dome light bulb (1) Instrument panel light (1) Handle (1) Engine (9) Starter motor (1) Engine oil (1) Clock (7) Door trim panel (6) Front bumper (4) Rear bumper (1) Brake pads (2) Shift knob (8) Pump (1) Instrument cluster (1) Heater core (2) Wheel (1) Fuse box (19) Axle shaft (1) Door lock (1) Warning light – error code (12) (3) Tire pressure warning light (1) Service warning light (47) Engine mount (1) Windshield wipers (4) Cylinder head (1) Center console tunnel (1) Turbocharger (2) Blower motor (5)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos