Do it yourself
| ||||
|
Renault Laguna - Shock absorbers
Renault Laguna (2007-2015 / MK III, X91, MK 3, Laguna3, Lagunaiii)
Front shock absorber replacement Remove the wheel in question and place your car on pedestals to work more comfortably, now unscrew the bolt that is exactly at the end of the lower part of the …read all… Posted on 21 September 2023 by ScegliAuto
Renault Laguna (2007-2015 / MK III, X91, MK 3, Laguna3, Lagunaiii)
How to change the shock absorbers of your car After several kilometers, the shock absorbers of our car can suffer wear and must be replaced. The shock absorbers have the function of cushioning the jolts of …read all… Posted on 11 September 2023 by ScegliAuto
Renault Laguna (2007-2015 / MK III, X91, MK 3, Laguna3, Lagunaiii)
How to replace the front shock absorbers. We put the car on the deck, or we use the jack, and we lift it to a comfortable height. We disassemble the rubber corresponding to the shock absorber …read all… Posted on 9 September 2023 by ScegliAuto
Renault Laguna (2007-2015 / MK III, X91, MK 3, Laguna3, Lagunaiii)
Rear shock absorber replacement The replacement of the rear shock absorbers is extremely simple to carry out and does not even require access to the boot for disassembly: everything is done …read all… Posted on 8 September 2023 by ScegliAuto
Renault Laguna (2007-2015 / MK III, X91, MK 3, Laguna3, Lagunaiii)
How to replace shock absorbers The goal of the shock absorbers is to slow down the movement of the suspension. If the car has driven several kilometers, it must be replaced. They can be …read all… Posted on 7 September 2023 by ScegliAuto
Renault Laguna (2007-2015 / MK III, X91, MK 3, Laguna3, Lagunaiii)
How to replace the rear shock absorber. Place the car on the bridge and raise it to a height suitable for the job. Remove the rear wheel with the appropriate keys. Place a hydraulic jack under the …read all… Posted on 5 September 2023 by ScegliAuto
Renault Laguna (2007-2015 / MK III, X91, MK 3, Laguna3, Lagunaiii)
Front shock absorber replacement For this operation only an 18 socket wrench is required. Remove the wheel and unscrew the nut that holds one end of the shock absorber to the car chassis. …read all… Posted on 26 June 2023 by ScegliAuto Shock absorbers (7) Car stereo (7) Arm (1) Bodywork (3) Key (5) Timing belt (2) Air conditioning controls (1) -board computer (3) Checks and maintenance (21) Throttle body (1) Dashboard (2) Brake discs (3) Headlight (8) Tail light (3) Fog lights (1) Particulate filter (1) Air filter (7) Cabin air filter (6) Diesel filter (2) Hand brake (1) Xenon headlight kit (1) Light bulb (1) Headlight bulb (10) Dashboard light (1) Engine (8) Starter motor (1) Engine oil (1) Door panel (5) Front bumper (1) Rear bumper (1) Brake pads (2) Gear Shift Knob (4) Instrument cluster (4) Passenger compartment heating radiator (2) Fuse box (7) Drive shaft (1) Lock (1) Windscreen wipers (2) Central tunnel (1) Turbine (2) Interior blower (3) |
How to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |