Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear Shock Absorber Replacement

Model: Renault Laguna MK 3, Laguna III, MK III, X91, Laguna 3 - Years 2007-2015
Part: Shocks

Replacing the rear shock absorbers is extremely simple and does not require access to the boot for removal: everything is done from the outside; lift the vehicle on the ramp and remove the rear wheel for better manoeuvrability; then remove the upper eyelet mounting pin of the shock absorber and then the lower one, which is accessed by lowering the plastic protective cover secured with plastic pressure clips; once the pins are removed, extract the old shock absorber and install the new one by reversing the process.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Shock Absorber
How to Replace the Rear Shock Absorber
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) Place the car on a ramp and lift it to a suitable height for the job. Remove the rear wheel using the appropriate tools. Position a hydraulic jack un…
Front Shock Absorber Replacement
Front Shock Absorber Replacement
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) You only need an 18 mm socket spanner for this operation. Remove the wheel and undo the nut that secures one end of the shock absorber to the vehicle…
How to Replace the Front Shock Absorbers
How to Replace the Front Shock Absorbers
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) Place the car on a ramp or use a jack, and lift it to a comfortable height. Remove the corresponding tyre for the shock absorber in question. Disconn…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos