Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Temperature Sensor on Renault Laguna

Model: Renault Laguna MK 3, Laguna III, MK III, X91, Laguna 3 - Years 2007-2015
Part: Checks and maintenance

How to remove the temperature sensor? Remove the mirror from the mirror housing to access the temperature sensor. Pry between the perimeter of the mirror frame and the mirror glass (using a plastic or rubber-coated lever). Pry until the mirror detaches from the housing; this is a very delicate operation as the glass or the mirror itself could break. Once the mirror is removed, disconnect the power connector of the glass and take it out. Disconnect the temperature sensor connector, then remove it and replace it with a new one.

Updated on 10 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) In addition to using their own method of resetting the tire pressure warning light, which is activated when an anomaly is detected by the sensors suc…
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) When the tyre pressure warning appears on the Renault Laguna 3 along with the corresponding light, the first step is to check all the tyres and adjus…
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) Here are the instructions to remove and replace the rear light and its bulbs on a Renault Laguna. First, open the boot lid and start removing the sid…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos