Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Pollen Filter on a Renault Laguna

Model: Renault Laguna MK III, X91, Laguna III, MK 3, Laguna 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

See other generations:
Video tutorial

In today’s video tutorial, we will see how to remove and replace the cabin pollen filter of a third-generation Renault Laguna. Get inside the car and first remove the side plastic next to the glove compartment: take out the screws found underneath and the additional screws inside the glove compartment; remove the glove compartment.

Now, detach the plastic cover and take off the central plastic, thus accessing the filter; remove its cover and extract the old filter, replacing it with the new one.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Pollen Filter of a Renault Laguna
How to Replace the Cabin Pollen Filter of a Renault Laguna
Renault Laguna (1994-2001 / MK 1, Laguna 1, X56) Before you start, open the front bonnet of your Renault Laguna. Begin by removing the rear seal of the bonnet. Next, unscrew the four Torx screws tha…
How to Change the Dipped Beam Bulb on a Renault Laguna 3?
How to Change the Dipped Beam Bulb on a Renault Laguna 3?
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) This is one of the most common methods used for changing the dipped beam bulb on a Renault Laguna 3. If you decide to change the headlight bulbs your…
How to Replace the Air Filter on a Renault Laguna
How to Replace the Air Filter on a Renault Laguna
Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) Before you can start, open the bonnet of your Renault Laguna. Begin by unscrewing and removing the screws that secure the upper cover of the air filt…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos