Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Pollen Filter of a Renault Laguna

Model: Renault Laguna MK 1, Laguna 1, X56 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Cabin air filter

See other generations:
Video tutorial

Before you start, open the front bonnet of your Renault Laguna. Begin by removing the rear seal of the bonnet.

Next, unscrew the four Torx screws that secure the relevant vent. This will allow you to access the cover of the cabin pollen filter.

Proceed to remove this cover by unfastening the two clips that hold it in place. Once you have removed the cover, you will reach the filter, which you can extract, completing the disassembly.

To install the new filter and close everything up, simply reverse these instructions, and you will have completed the replacement.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Renault Laguna.
How to replace the cabin air filter of the Renault Laguna.
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) Below we will see the procedure for replacing the cabin air filter or pollen filter of the Renault Laguna. First, let's get inside the vehicle and st…
Replacing the Pollen Filter on a Renault Laguna
Replacing the Pollen Filter on a Renault Laguna
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) In today’s video tutorial, we will see how to remove and replace the cabin pollen filter of a third-generation Renault Laguna. Get inside the car and…
How to Remove the Cabin Fan of the Renault Laguna
How to Remove the Cabin Fan of the Renault Laguna
Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) In today's tutorial, we will see the instructions to remove and replace the cabin or air conditioning fan of the Renault Laguna. First, get inside th…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos