Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : Engine

Renault Megane - Engine

Renault Megane (1995-2003 / Megane1)
Head fixing pins replacement
If a repair has been made to the engine that required disassembly of the cylinder head, then it is absolutely essential to use a new set of pins for the …read all…
Posted on 31 August 2023 by ScegliAuto
Renault Megane (2008-2015 / Meganeiii, Megane3)
Engine head gasket replacement
Before installing the new cylinder head gasket it is absolutely essential to check that the previous overheating has not deformed the surface of the cylinder …read all…
Posted on 25 August 2023 by ScegliAuto
Renault Megane (1995-2003 / Megane1)
Engine head gasket replacement
When disassembling the cylinder head to replace the relative gasket, it is advisable to carry out a general overhaul of the cylinder head itself to ensure a …read all…
Posted on 22 August 2023 by ScegliAuto
Renault Megane (2008-2015 / Meganeiii, Megane3)
Replacing the tappet cover gasket
When carrying out a repair that requires the disassembly of covers and / or casings which also include a gasket, it is always advisable to replace it with a …read all…
Posted on 18 August 2023 by ScegliAuto
Renault Megane (1995-2003 / Megane1)
Head gasket replacement
When replacing the cylinder head gasket it is advisable to observe a series of precautions: start by checking the perfect flatness of the surface of the …read all…
Posted on 17 August 2023 by ScegliAuto
Renault Megane (1995-2003 / Megane1)
Intake manifold gasket replacement
When an engine has to be reassembled, for example after disassembly to replace the cylinder head gasket, it is good practice to replace all the gaskets: there …read all…
Posted on 14 August 2023 by ScegliAuto
Renault Megane (1995-2003 / Megane1)
Crankshaft pulley replacement
Loosen the pins of the front right wheel before lifting the car, place it on suitable stands and complete the disassembly of the wheel; then disassemble the …read all…
Posted on 14 August 2023 by ScegliAuto
Renault Megane (1995-2003 / Megane1)
Guide to replacing the motor head
The engine gasket serves to isolate the cylinders from the cooling ducts around them and to separate the oil and cooling ducts to prevent the two streams from …read all…
Posted on 11 August 2023 by ScegliAuto
Renault Megane (1995-2003 / Megane1)
Camshaft oil seal replacement
once the camshaft has been positioned and fixed in its seat, it is always advisable to replace the lateral oil seal: before installing it, both the new oil …read all…
Posted on 7 August 2023 by ScegliAuto
Renault Megane (1995-2003 / Megane1)
Removing the wiper motor
The wiper motor is integrated into the wiper mechanism and is located just under the windshield, masked by the plastic cover; to be able to disassemble it it …read all…
Posted on 7 August 2023 by ScegliAuto
Renault Megane (1995-2003 / Megane1)
Replacing the tappet cover gasket
Before applying the new gasket to the tappet cover, carefully clean the gasket seat, both on the cylinder head side and on the cover side, in order to …read all…
Posted on 6 August 2023 by ScegliAuto
Renault Megane (2008-2015 / Meganeiii, Megane3)
Replacement exhaust manifold gasket
Before applying the new gasket, it is absolutely essential to carefully clean the seat of the gasket itself, both on the head side and on the manifold side, …read all…
Posted on 5 August 2023 by ScegliAuto
Renault Megane (2008-2015 / Meganeiii, Megane3)
Head gasket replacement
When replacing the cylinder head it is practically necessary to remove the entire upper part of the engine, leaving only the cylinder block: it is good …read all…
Posted on 5 August 2023 by ScegliAuto
Renault Megane (1995-2003 / Megane1)
Replacement exhaust manifold gasket
After having carefully cleaned the seat of the gasket, place it by aligning it with the captive pins and fit the exhaust manifold; then tighten the manifold …read all…
Posted on 5 August 2023 by ScegliAuto
Renault Megane (1995-2003 / Megane1)
Changing the injection pump in the car
The oil pump is a tool that is used in the automobile to circulate oil. It is widely used in internal combustion engines. The first thing to do is to …read all…
Posted on 4 August 2023 by ScegliAuto
Cigarette Lighter (3) Airbags (6) Alternator (3) Loudspeaker (7) Shock absorbers (9) Car stereo (39) Battery (14) Air Vents (2) Arm (2) Gearbox (2) Spark plugs (7) Glow plugs (5) Soft top (1) Bodywork (1) Glove box (2) Control unit (1) Key (34) Timing belt (12) V-belt (4) Air conditioning (1) -board computer (30) Checks and maintenance (157) Dashboard (3) Gearshift gaiter (1) Bearing (1) Mass air flow sensor (3) Brake discs (9) Side indicator light (1) Headlight (14) Tail light (15) Fog lights (7) Particulate filter (1) Air filter (16) Cabin air filter (29) Petrol filter (1) Diesel filter (14) Oil filter (1) Hand brake (4) Injectors (4) Window lift switch (2) Light bulb (7) Side turn signal light bulb (4) Headlight bulb (40) Rear light bulb (17) Interior lights ceiling light bulb (5) Dashboard light (4) License plate light (6) Third brake light (2) Handle (8) Muffler (1) Engine (15) Window motor (4) Starter motor (13) Gear oil (2) Brake oil (1) Engine oil (14) Door panel (40) Front bumper (7) Rear bumper (3) Brake pads (13) Tires (8) Gear Shift Knob (9) Pump (4) Fuel pump (5) Door (3) Window lift button (1) Instrument cluster (36) Radiator (2) Passenger compartment heating radiator (1) Wheel (3) Fuse box (46) Seat (3) Crankshaft RPM sensor (1) Lock (2) Suspensions (2) Outside rearview mirror (11) Interior rearview mirror (2) Manufacturer's coat of arms (2) Engine mount (1) Windscreen wipers (9) Engine head (2) Steering rods (2) Transmission (1) Central tunnel (1) Turbine (4) Valve (1) EGR valve (5) Interior blower (10) Side window (3) Steering wheel (1)

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos