Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Crankshaft Pulley

Model: Renault Megane Megane 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Engine

See other generations:
This video is currently unavailable

Loosen the bolts of the front right wheel before lifting the vehicle, place it on suitable axle stands and complete the wheel removal; then remove the wheel arch lining by taking out the fixing screws and pressure clips; access the engine bay to remove the auxiliary belt tensioner and slide the belt off the pulleys; then remove the protective cover of the crankshaft pulley, slide off the auxiliary belt and proceed to remove the fixing bolt of the pulley itself, taking it out of its seat and work in reverse for the installation of the new one (consider whether to also replace the auxiliary belt).


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on a Renault Megane 2 1.5 DCI
Replacing the Timing Belt on a Renault Megane 2 1.5 DCI
Renault Megane (2002-2010 / Megane 2) In this guide, we will go through the main steps to change the timing belt on a Renault Megane second series with a 1.5 DCI engine. First, lift the v…
How to Remove the Crankshaft Position Sensor on a Renault Megane
How to Remove the Crankshaft Position Sensor on a Renault Megane
Renault Megane (2002-2010 / Megane 2) How to remove the crankshaft position sensor on a Renault Megane? Let’s look at the replacement. Lift the front bonnet and secure it with the prop ro…
How to Replace the Timing Belt on the Renault Scenic?
How to Replace the Timing Belt on the Renault Scenic?
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the timing belt on this model, refer to the following description and especially watch the video. First, open the bonnet and disconnect th…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos