Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace a wheel on a Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Wheel

In this video, you will learn how to replace a wheel on a Renault Megane saloon. Open the boot to access the spare wheel located under the boot floor. Next, loosen the bolts of the wheel to be replaced and position the jack as close as possible to the affected wheel, then lift the vehicle off the ground. At this point, you can completely loosen the wheel bolts and remove the wheel from the hub. Fit the spare wheel in its place, aligning the fixing holes with those of the hub; if the spare wheel has its own bolts, use them (only for that), lower the vehicle, and tighten the bolts securely. Place the damaged wheel in the position of the spare wheel, and have the nearest service station check the pressure of the spare wheel and the tightness of the bolts.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radio in a Renault Megane?
How to Replace the Radio in a Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the radio in a Renault Megane, use a tool to lever off the trim located at the front of the dashboard, on the passenger side. Next, remove…
Location and Diagram of Fuse Boxes for Renault Megane IV
Location and Diagram of Fuse Boxes for Renault Megane IV
Renault Megane (2015-2023 / Megane 4, Megane IV) In this video, we will see the positioning of the fuse boxes for the Renault Megane IV: the fuses that the user can access are located in the passeng…
How to Replace the Timing Belt on a Renault Megane
How to Replace the Timing Belt on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the timing belt on a Renault Megane, lift the car to loosen the bolts securing the front right wheel, then remove the wheel completely. On…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos