Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rocker Cover Gasket Replacement

Model: Renault Megane Megane 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Engine

See other generations:
Video tutorial

Before applying the new gasket to the rocker cover, thoroughly clean the gasket seating area on both the cylinder head side and the cover side to remove any dirt and deposits that could compromise the adhesion and sealing of the gasket itself. The gasket is a rubber ring to be placed along the edges of the rocker cover where there is a specific groove; it is recommended to apply gasket sealant at the edge between the flat seating of the cylinder head and the radius of the oil seal seating of the camshaft; finally, position the cover and tighten the respective mounting bolts.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Replacing the Rocker Cover Gasket
Replacing the Rocker Cover Gasket
Renault Megane (2008-2015 / Megane III, Megane 3) When carrying out a repair that requires the removal of covers and/or casings that include a gasket, it is always advisable to replace it with a new …
Cylinder Head Gasket Replacement
Cylinder Head Gasket Replacement
Renault Megane (2008-2015 / Megane III, Megane 3) When replacing the cylinder head, you will practically need to dismantle the entire upper part of the engine, leaving only the cylinder block: it is …
Replacing the Engine Cylinder Head Gasket
Replacing the Engine Cylinder Head Gasket
Renault Megane (1995-2003 / Megane 1) When removing the cylinder head to replace the gasket, it is advisable to carry out a general inspection of the cylinder head itself to ensure a more…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos