Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Cylinder Head

Model: Renault Megane Megane 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Engine

See other generations:
Video tutorial

The engine gasket serves to isolate the cylinders from the cooling passages surrounding them and to separate the oil and cooling passages to prevent the two flows from mixing. First, check that the engine block has not been deformed and clean the surface of the head and engine block, as well as the bolt holes that secure the cylinder head cover to the engine block.

You can then apply the new gasket to the engine block and replace the cylinder head cover on top of the new gasket, tightening the bolts with a ratchet spanner.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Replacing the Cylinder Head Gasket
Replacing the Cylinder Head Gasket
Renault Megane (1995-2003 / Megane 1) When replacing the cylinder head gasket, it is important to observe a series of precautions: start by checking the flatness of the cylinder head and …
Guide to Removing the Cylinder Head Cover on a Renault Megane 1.4 MK1
Guide to Removing the Cylinder Head Cover on a Renault Megane 1.4 MK1
Renault Megane (1995-2003 / Megane 1) In this guide, you will discover the main steps to disassemble and replace the cylinder head or valve cover on the first series Renault Megane with a…
Replacing Spark Plugs on Megane
Replacing Spark Plugs on Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Replacing the spark plugs on a Megane? Here's how to remove them from the engine. Lift the front bonnet and secure it. Unscrew the retaining bolts of…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos